Difference between revisions of "Basic configuration IPv6 Cisco IOS"
From Teknologisk videncenter
m |
m (→Enabling IPv6 Globally) |
||
| Line 1: | Line 1: | ||
=Enabling IPv6 Globally= | =Enabling IPv6 Globally= | ||
| + | Start the IPv6 routing process and allow IPv6 [[IP CEF Cisco|CEF]] switching. | ||
<source lang=cli> | <source lang=cli> | ||
Router(config)#<input>ipv6 unicast-routing</input> | Router(config)#<input>ipv6 unicast-routing</input> | ||
Router(config)#<input>ipv6 cef</input> | Router(config)#<input>ipv6 cef</input> | ||
</source> | </source> | ||
| + | |||
=Configuring IPv6 address on interface= | =Configuring IPv6 address on interface= | ||
<source lang=cli> | <source lang=cli> | ||
Revision as of 14:10, 1 June 2011
Enabling IPv6 Globally
Start the IPv6 routing process and allow IPv6 CEF switching.
Router(config)#<input>ipv6 unicast-routing</input>
Router(config)#<input>ipv6 cef</input>Configuring IPv6 address on interface
R3(config)#<input>int fa0/0</input>
R3(config-if)#<input>ipv6 enable</input>
R3(config-if)#<input>ipv6 address 2001:16D8:DD85:139::7/64</input>Showing IPv6 configuration on interface
R3#<input>show ipv6 int fa0/0</input>
FastEthernet0/0 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::128C:CFFF:FE2E:916E
No Virtual link-local address(es):
Global unicast address(es):
2001:16D8:DD85:139::7, subnet is 2001:16D8:DD85:139::/64
Joined group address(es):
FF02::1
FF02::2
FF02::1:FF00:7
FF02::1:FF2E:916E
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ICMP unreachables are sent
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds (using 30000)
ND advertised reachable time is 0 (unspecified)
ND advertised retransmit interval is 0 (unspecified)
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
ND advertised default router preference is Medium
Hosts use stateless autoconfig for addresses.