Difference between revisions of "TDC IPv6 kursus 5 dages/Øvelse BGP"

Revision as of 14:44, 24 November 2011

ToDo

Grundkonfiguration af Router

Slet tidligere konfigurationer. Se evtuelt artiklen Cisco basic configuration

R5# <input>erase startup</input>
R5# <input>reload</input>

Kør setup programmet vælg cisco,class og cisco som passwords-

IPv4 overordnet

Konfigurer IPv4 adresser på Fa0/0, Fa0/1, Looopback 0 konfigurer et kundenet på loopback 10
Konfigurerer IPv4 IS-IS inden for de enkelte AS (Anvend loopback 0 til at finde NSAP adresse)
Konfigurer IPv4 iBGP mellem routerne i AS'et
Konfigurer IPv4 eBGP til nabo AS
1. R1 og R8 skal konfigurere default-gateway til L3 switch
2. R1 og R8 konfigurerer default gateway til Lag 3 switch med BGP kommandoen default-information originate og annoncere network 0.0.0.0 i BGP
Test at der er fuld IPv4 konnektivitet

IPv4 adresser på interfaces

interface Loopback0
 ip address 192.168.217.1 255.255.255.255
!
interface Loopback10
 description Kundenet der skan annonceres til alle
 ip address 192.168.218.1 255.255.255.255
!
interface FastEthernet0/0
 description Link to R6
 ip address 192.168.216.1 255.255.255.0
!
interface FastEthernet0/1
 description Link to R4
 no shutdown
 ip address 192.168.212.2 255.255.255.0

IPv4 IS-IS indenfor AS'et

ip routing
!
router isis
 net 49.0000.1921.6821.7001.00
 is-type level-2-only
 metric-style wide
!
interface Loopback0
 ip router isis
!
interface FastEthernet0/0
 ip router isis

iBGP indenfor AS'et

router bgp 300
 no synchronization
 neighbor 192.168.217.2 remote-as 300
 neighbor 192.168.217.2 update-source Loopback0
 neighbor 192.168.217.2 next-hop-self
 network 192.168.218.0 mask 255.255.255.0
 network 192.168.216.0 mask 255.255.255.0
 no auto-summary

eBGP til nabo-as

router bgp 300
 neighbor 192.168.212.1 remote-as 200
 neighbor 192.168.212.1 update-source FastEthernet0/1

IPv4 Test kommandoer

show cdp neighbors
show ip route

IS-IS

show isis neighbors
show isis database detail

BGP

show ip bgp neighbors
show ip bgp summary
show ip bgp

Vent på alle hold er færdig med IPv4

IPv6 overordnet

Konfigurer IPv6 adresser på Fa0/0 og Fa0/1
Konfigurer IPv6 IS-IS på fa0/0 og Fa0/1
Konfigurer IPv6 iBGP til routere i AS'et
Konfigurer IPv6 eBGP til nabo AS'et
1. R1 og R8 skal konfigurere default-gateway til L3 switch
2. R1 og R8 konfigurerer default gateway til Lag 3 switch med BGP kommandoen default-information originate i address-family ipv6
Test der er fuld IPv6 Konnektivitet

IPv6 adresser

interface loopback 0
 ipv6 address 2001:16d8:dd85:a501::1/128
!
interface loopback 10
 description Supporneret kundenet
 ip address 2001:16D8:DD85:A502::1/64
!
interface FastEthernet0/0
 ipv6 address 2001:16D8:DD85:A500::1/64
!
interface FastEthernet0/1
 ipv6 address 2001:16D8:DD85:A400::2/64

IPv6 IS-IS

interface FastEthernet0/0
 ipv6 router isis
 isis circuit-type level-2-only
!
interface loopback 0
 ipv6 router isis
 isis circuit-type level-2-only

IPv6 iBGP til nabo i AS

router bgp 300
 bgp router-id 192.168.217.1
 no bgp default ipv4-unicast
 <notice>neighbor 2001:16D8:DD85:A501::2 remote-as 300
 neighbor 2001:16D8:DD85:A501::2 update-source Loopback0</notice>
 !
 address-family ipv6
  neighbor 2001:16D8:DD85:A501::2 activate
  neighbor 2001:16D8:DD85:A501::2 next-hop-self
  network 2001:16d6:dd85:a500::/64
  network 2001:16d6:dd85:a502::/64
  exit-address-family

IPv6 eBGP til nabo AS

router bgp 300
 !
 address-family ipv6
 neighbor 192.168.212.1 activate

IPv6 test kommandoer

show bgp ipv6 unicast summary
show bgp ipv6 unicast neighbors
sh bgp ipv6 unicast neighbors 192.168.212.1 advertised-routes
sh bgp ipv6 unicast neighbors 192.168.212.1 routes
show isis ipv6 rib
show isis ipv6 topology