Difference between revisions of "IPv4-Mapped IPv6 Address"
From Teknologisk videncenter
m |
m |
||
| Line 30: | Line 30: | ||
</input> | </input> | ||
</source> | </source> | ||
| + | {{source cli}} | ||
Revision as of 07:20, 25 November 2011
IPv4 Mapped
| IPv6 Address Type: | IPv4 Mapped |
| Prefix: | ::ffff/96 |
| Local Routeable: | Yes |
| Global Routeable: | Yes |
| Global Unique: | Yes |
| Example: | ::ffff:83.90.47.30 |
| IPv4 Equivalent: | None |
| Described in: | rfc4291 |
| rfc4038 section 4.2 | |
Explanation
These addresses are used to embed IPv4 addresses in an IPv6 address. One use for this is in a dual stack transition scenario where IPv4 addresses can be mapped into an IPv6 address.
See RFC 4038 for more details
IPv4-mapped IPv6 addresses are used in scenarios where IPv6 an IPv6-only application need to communicate with an IPv4 only application using IPv4 packets.
<input>
C:\Users\Henrik thomsen><notice>ping ::ffff:192.168.146.1</notice>
Pinging 192.168.146.1 with 32 bytes of data:
Reply from 192.168.146.1: bytes=32 time=1ms TTL=255
Reply from 192.168.146.1: bytes=32 time=1ms TTL=255
Reply from 192.168.146.1: bytes=32 time=2ms TTL=255
Reply from 192.168.146.1: bytes=32 time=2ms TTL=255
Ping statistics for 192.168.146.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 2ms, Average = 1ms
</input>