Difference between revisions of "DHCPv6 Cisco IOS"
From Teknologisk videncenter
m |
m |
||
| Line 6: | Line 6: | ||
<source lang=cli> | <source lang=cli> | ||
R1(config)#<input>interface fastethernet 0/0</input> | R1(config)#<input>interface fastethernet 0/0</input> | ||
| − | R1(config-if)# <input>ipv6 dhcp relay destination FE80::250:A2FF:FEBF:A056 fastethernet0/1</input> | + | R1(config-if)#<input>ipv6 dhcp relay destination FE80::250:A2FF:FEBF:A056 fastethernet0/1</input> |
</source> | </source> | ||
==To global unicast== | ==To global unicast== | ||
<source lang=cli> | <source lang=cli> | ||
R1(config)#<input>interface fastethernet 0/0</input> | R1(config)#<input>interface fastethernet 0/0</input> | ||
| − | R1(config-if)# <input>ipv6 dhcp relay destination 2001:16D8:DD85:146::2</input> | + | R1(config-if)#<input>ipv6 dhcp relay destination 2001:16D8:DD85:146::2</input> |
</source> | </source> | ||
==To Multicast All Site Local DHCPv6 servers== | ==To Multicast All Site Local DHCPv6 servers== | ||
<source lang=cli> | <source lang=cli> | ||
R1(config)#<input>interface fastethernet 0/0</input> | R1(config)#<input>interface fastethernet 0/0</input> | ||
| − | R1(config-if)# <input>ipv6 dhcp relay destination FF05::1:3</input> | + | R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input> |
</source> | </source> | ||
Revision as of 16:31, 12 December 2011
This article is under development....
This article will be written when the author gets experience using DHCPv6. (Hopefully shortly :-)
DHCPv6 Relay agent
On local link
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FE80::250:A2FF:FEBF:A056 fastethernet0/1</input>To global unicast
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination 2001:16D8:DD85:146::2</input>To Multicast All Site Local DHCPv6 servers
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input>