Difference between revisions of "DHCPv6 Cisco IOS"
From Teknologisk videncenter
m (→DHCPv6 multicast) |
m (→To Multicast All Site Local DHCPv6 servers) |
||
| Line 44: | Line 44: | ||
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input> | R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input> | ||
</source> | </source> | ||
| + | All Routers must have IPv6 Multicast Routing enabled. | ||
| + | <source lang=cli> | ||
| + | PE2(config)#<input>ipv6 multicast-routing</input> | ||
| + | </source> | ||
| + | |||
==Troubleshooting== | ==Troubleshooting== | ||
<source lang=cli> | <source lang=cli> | ||
Revision as of 07:57, 17 December 2011
This article is under development....
This article will be written when the author gets experience using DHCPv6. (Hopefully shortly :-)
DHCPv6 multicast
- Local link DHCPv6 multicast FF02::1:2
- Entire site DHCPv6 multicast FF05::1:3
- NOTE
- When using entire site multicast remember to enable ipv6 multicast routing
ipv6 multicast-routingDHCPv6 other-config-flag
Node will autoconfigure its IPv6 address using Stateless Autoconfiguration. The ipv6 nd other-config-flag teels the node to collect remaining setup from DHCPv6- in this case DNS-server IP and domain-name.
ipv6 dhcp pool ROOM308
dns-server 2001:16D8:DD85:B000:20C:29FF:FE84:CC63
domain-name netlab.tekkom.dk
!
interface FastEthernet0/1
ipv6 address 2001:16D8:DD85:B000::1/64
ipv6 enable
ipv6 nd other-config-flag
ipv6 dhcp server ROOM308
!DHCPv6 Relay agent
On local link
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FE80::250:A2FF:FEBF:A056 fastethernet0/1</input>To global unicast
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination 2001:16D8:DD85:146::2</input>
R1(config-if)#<input>ipv6 dhcp relay source-interface loopback 0</input>To Multicast All Site Local DHCPv6 servers
R1(config)#<input>interface fastethernet 0/0</input>
R1(config-if)#<input>ipv6 dhcp relay destination FF05::1:3</input>All Routers must have IPv6 Multicast Routing enabled.
PE2(config)#<input>ipv6 multicast-routing</input>Troubleshooting
R1#<input>show ipv6 dhcp pool ROOM308</input>
DHCPv6 pool: ROOM308
DNS server: 2001:16D8:DD85:B000:20C:29FF:FE84:CC63
Active clients: 0
R1#<input>terminal monitor</input>
R1#<input>debug ipv6 dhcp database ?</input>
IPv6 DHCP database debugging is on