Difference between revisions of "Ubuntu Infiniband"
From Teknologisk videncenter
m (Created page with "Ubuntu 10.04 LTE do not support Infiniband. NO opensm package. =Upgrading from 10.04 LTE to 10.10= install the update-manager-core package if it is not already installed: <so...") |
m (→Links) |
||
| Line 61: | Line 61: | ||
*[http://www.unixmen.com/how-to-upgrade-from-ubuntu-1010-to-ubuntu-1104-natty-desktop-a-server/ Upgrading Ubuntu] | *[http://www.unixmen.com/how-to-upgrade-from-ubuntu-1010-to-ubuntu-1104-natty-desktop-a-server/ Upgrading Ubuntu] | ||
*[http://davidhunt.ie/wp/?p=2291 Infiniband on Ubuntu 11.10] | *[http://davidhunt.ie/wp/?p=2291 Infiniband on Ubuntu 11.10] | ||
| − | {{Source lang=cli | + | {{Source lang=cli}} |
[[Category:Ubuntu]] | [[Category:Ubuntu]] | ||
Revision as of 05:52, 24 April 2012
Ubuntu 10.04 LTE do not support Infiniband. NO opensm package.
Upgrading from 10.04 LTE to 10.10
install the update-manager-core package if it is not already installed:
sudo apt-get install update-manager-coreEdit /etc/update-manager/release-upgrades and set Prompt=normal;
Launch the upgrade tool with the command
sudo do-release-upgrade -dand follow the on-screen instructions.
Checking hardware
root@DKAM1:~# <input>modprobe ib_sa</input>
root@DKAM1:~# <input>modprobe ib_cm</input>
root@DKAM1:~# <input>modprobe ib_umad</input>
root@DKAM1:~# <input>modprobe ib_addr</input>
root@DKAM1:~# <input>modprobe ib_uverbs</input>
root@DKAM1:~# <input>modprobe ib_ipoib</input>
root@DKAM1:~# <input>modprobe ib_ipath</input>
FATAL: Error inserting ib_ipath (/lib/modules/2.6.35-32-generic/kernel/drivers/infiniband/hw/ipath/ib_ipath.ko): Device or resource busy
root@DKAM1:~# <input>modprobe ib_qib</input>
root@DKAM1:~# <input>ifconfig ib0</input>
ib0 Link encap:UNSPEC HWaddr 80-00-00-02-FE-80-00-00-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:4092 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:256
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@DKAM1:~# <input> ibstat</input>
CA 'qib0'
CA type: InfiniPath_QLE7340
Number of ports: 1
Firmware version:
Hardware version: 2
Node GUID: 0x0011750000788b2c
System image GUID: 0x0011750000788b2c
Port 1:
State: Down
Physical state: Polling
Rate: 10
Base lid: 65535
LMC: 0
SM lid: 65535
Capability mask: 0x07610868
Port GUID: 0x0011750000788b2c
root@DKAM1:~# <input>ibstatus</input>
Infiniband device 'qib0' port 1 status:
default gid: fe80:0000:0000:0000:0011:7500:0078:8b2c
base lid: 0xffff
sm lid: 0xffff
state: 1: DOWN
phys state: 2: Polling
rate: <notice>10 Gb/sec (4X)</notice>