Difference between revisions of "Ping cisco ios"
From Teknologisk videncenter
m (Created page with "When using Cisco IOS to ping, single character response codes are shown on-screen. <source lang=cli> R1#<input>ping 172.16.4.17</input> Type escape sequence to abort. Sending 5,...") |
(No difference)
|
Revision as of 09:41, 14 March 2013
When using Cisco IOS to ping, single character response codes are shown on-screen.
R1#<input>ping 172.16.4.17</input>
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.4.17, timeout is 2 seconds:
<notice>!.U!.</notice>
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Ping character explanations
Character | Explanation |
---|---|
! | Each exclamation point indicates receipt of a reply |
. | Each period indicates the network server timed out while waiting for a reply |
U | A destination unreachable error PDU was received |
Q | Source quench (destination too busy) |
M | Could not fragment |
? | Unknown packet type |
& | Packet lifetime exceeded |