Difference between revisions of "3-tier design/STPconfig"
From Teknologisk videncenter
m |
m |
||
| Line 1: | Line 1: | ||
| + | Configure Switch 1 to be primary | ||
<source lang=cli> | <source lang=cli> | ||
DLS1(config)#<input>spanning-tree vlan 10 root primary</input> | DLS1(config)#<input>spanning-tree vlan 10 root primary</input> | ||
| Line 21: | Line 22: | ||
DLS1# | DLS1# | ||
</source> | </source> | ||
| − | + | And Switch 2 to be secondary | |
| + | <source lang=cli> | ||
| + | DLS2(config)#<input>spanning-tree vlan 10 root secondary</input> | ||
| + | DLS2(config)# | ||
| + | </source> | ||
{{Source cli}} | {{Source cli}} | ||
Revision as of 09:39, 12 November 2014
Configure Switch 1 to be primary
DLS1(config)#<input>spanning-tree vlan 10 root primary</input>
DLS1(config)#<input>end</input>
DLS1#<input>show span vlan 10</input>
VLAN0010
Spanning tree enabled <notice>protocol ieee</notice>
<notice>Root ID Priority 24586</notice>
Address 0001.436B.E384
<notice>This bridge is the root</notice>
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 24586 (priority 24576 sys-id-ext 10)
Address 0001.436B.E384
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 20
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Fa0/2 <notice>Desg FWD</notice> 19 128.2 P2p
DLS1#And Switch 2 to be secondary
DLS2(config)#<input>spanning-tree vlan 10 root secondary</input>
DLS2(config)#