Difference between revisions of "3-tier design/tunnelConfig"
From Teknologisk videncenter
m (Created page with "<source lang=cli> HQFW1#<input>show run</input> Building configuration... Current configuration : 1102 bytes ! <notice><-- output omitted --></notice> ! interface Tunnel0 ip ad...") |
(No difference)
|
Latest revision as of 11:34, 12 November 2014
HQFW1#<input>show run</input>
Building configuration...
Current configuration : 1102 bytes
!
<notice><-- output omitted --></notice>
!
interface Tunnel0
ip address 10.1.255.1 255.255.255.252
mtu 1476
tunnel source Ethernet0/0/0
tunnel destination 80.112.80.11
!
HQFW1#<input>show ip int brie</input>
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 10.0.0.2 YES manual up up
FastEthernet0/1 10.0.0.10 YES manual up up
Ethernet0/0/0 80.112.80.10 YES manual up up
<notice>Tunnel0 10.1.255.1 YES manual up up</notice>
Tunnel1 10.2.255.1 YES manual up up