Difference between revisions of "Cisco basic configuration"
From Teknologisk videncenter
m (New page: In this example we will configure a Cisco 2621XM Router *fastethernet 0/0 - 192.168.22.1/24 *fastethernet 0/1 - 172.16.0.1/16 *loopback 0/0 - 10.10.10.1/32 *RIP version 2 on both subnets C...) |
(No difference)
|
Revision as of 08:24, 8 April 2009
In this example we will configure a Cisco 2621XM Router
- fastethernet 0/0 - 192.168.22.1/24
- fastethernet 0/1 - 172.16.0.1/16
- loopback 0/0 - 10.10.10.1/32
- RIP version 2 on both subnets
Connect a cisco Roolover cable from the Routers Consoleport to a COM port on your PC. Start a terminalemulator. I will recommend the terminalemulator putty Start putty and fill out the serial data. Marked with red rings in picture 1.
