Difference between revisions of "Password Recovery Cisco Router IOS"
From Teknologisk videncenter
(Created page with "Procedure to recover the router password. #Connect to the console port. #Record the configuration register setting #Power cycle the router. #Issue the break sequence. #Type co...") |
(No difference)
|
Revision as of 15:10, 14 November 2017
Procedure to recover the router password.
- Connect to the console port.
- Record the configuration register setting
- Power cycle the router.
- Issue the break sequence.
- Type confreg 0x2142 to change the register settings.
- Type reset to reboot router.
- Skip the initial setup procedure.
- Enter privileged EXEC mode.
- Copy the startup configuration to the running configuration.
- Verify the running configuration.
- Enter global configuration and change enable secret password.
- Re-enable the shutdown interfaces.
- Change the configuration register settings using config-register 0x2102
- Save the configuration changes and reboot.