Difference between revisions of "BeagleBoardV-Ahead/Getting started"
From Teknologisk videncenter
(Created page with "=Without SD-Card - new= Plug ethernet to your network and power up the board from either USB-micro or the power plug. 5 volt 2 amps at least in documentation. But use 3 amps P...") |
(No difference)
|
Revision as of 07:05, 6 April 2024
Without SD-Card - new
Plug ethernet to your network and power up the board from either USB-micro or the power plug. 5 volt 2 amps at least in documentation. But use 3 amps PSU at least.
Locate BeagleV-Ahead IP address from your DHCP server or use nmap to locate the boards IP address.
heth@h5:~$ nmap -sP 192.168.1.0/24
Starting Nmap 7.80 ( https://nmap.org ) at 2024-04-06 05:59 UTC
Nmap scan report for _gateway (192.168.1.1)
....
Nmap scan report for BeagleV.home (192.168.1.78)
Host is up (0.0012s latency).
...
Nmap done: 256 IP addresses (15 hosts up) scanned in 2.53 seconds
nmap exists for Linux, Windows and Mac OS.