Difference between revisions of "IPMI/FreeBSD"

Revision as of 06:57, 26 September 2009

IPMI: Intelligent Platform Management Interface

Fra FreeBSD version 6.2^[1] er impi indbygget i base systemet. Bemærk IPMI er et indbygget overvågningssytem på motherboardet. Oftest fundet på server motherboard.

Enable IPMI

On-the-fly

[root@mars run]#<input>kldload ipmi</input>

Hvis IPMI modulet ikke loader, er IPMI sikkert ikke indbygget på dit motherboard. Automatic load when booting

[root@mars run]#<input>echo 'ipmi_load="YES"' >> /boot/loader.conf</input>

Using ipmi

For at bruge ipmi skal ipmitool installeres som package eller via ports. herunder vist installation af package

[root@mars run]#<input>pkg_add -r ipmitool</input>

Eksempel

[root@mars run]#<input>ipmitool chassis status</input>
System Power         : on
Power Overload       : false
Power Interlock      : inactive
Main Power Fault     : false
Power Control Fault  : false
Power Restore Policy : previous
Last Power Event     : ac-failed
Chassis Intrusion    : active
Front-Panel Lockout  : inactive
Drive Fault          : false
Cooling/Fan Fault    : false

Hardware (FRU: Field Replaceable Units)

[root@mars run]#ipmitool fru
FRU Device Description : Builtin FRU Device (ID 0)
 Chassis Type                    : Tower
 Board Mfg Date        : Tue Jan 13 08:35:00 2004
 Board Mfg             : Intel
 Board Product         : SE7501HG2
 Board Serial          : KRH140200266
 Board Part Number     : A95718-306
 Product Manufacturer  : Intel

Sensors.

[root@mars run]#<input>ipmitool sdr</input>
Baseboard 1.2V   | 1.20 Volts        | ok
Baseboard 1.25V  | 1.25 Volts        | ok
Baseboard 1.8V   | 1.78 Volts        | ok
Baseboard 1.8VSB | 1.80 Volts        | ok
Baseboard 2.5V   | 2.49 Volts        | ok
Baseboard 3.3V   | 3.25 Volts        | ok
Baseboard 3.3AUX | 3.21 Volts        | ok
Baseboard 5.0V   | 4.99 Volts        | ok
Baseboard 5VSB   | 4.97 Volts        | ok
Baseboard 12V    | 11.90 Volts       | ok
Baseboard 12VRM  | 11.95 Volts       | ok
Baseboard -12V   | -11.98 Volts      | ok
Baseboard VBAT   | 3.20 Volts        | ok
Baseboard Temp   | 38 degrees C      | ok
Basebrd FanBoost | 38 degrees C      | ok
SCSI A Term Pwr  | 4.76 Volts        | ok
SCSI B Term Pwr  | 4.73 Volts        | ok
Processor 1 Temp | 31 degrees C      | ok
Processor 2 Temp | 33 degrees C      | ok
Proc1 FanBoost   | 31 degrees C      | ok
Proc2 FanBoost   | 33 degrees C      | ok
Processor 1 Fan  | no reading        | ns
Processor 2 Fan  | no reading        | ns
Processor Vccp   | 1.47 Volts        | ok
Pwr Unit Status  | 0x00              | ok
BMC Watchdog     | 0x00              | ok
Scrty Violation  | 0x00              | ok
Physical Scrty   | 0x01              | ok
POST Error       | 0x00              | ok
Critical Int     | 0x00              | ok
Memory           | 0x00              | ok
Logging Disabled | 0x00              | ok
Proc Missing     | 0x00              | ok
ACPI State       | 0x01              | ok
System Event     | 0x00              | ok
Button           | 0x00              | ok
SMI Timeout      | 0x00              | ok
Sensor Failure   | 0x00              | ok
NMI State        | 0x00              | ok
SMI State        | 0x00              | ok
FSB Mismatch     | 0x00              | ok
Processor 1 Stat | 0x80              | ok
Processor 2 Stat | 0x80              | ok
CPU Therm Ctrl   | 0x01              | ok
Fan Redundancy   | Not Readable      | ns
DIMM 1           | 0x04              | ok
DIMM 2           | 0x04              | ok
DIMM 3           | 0x00              | ok
DIMM 4           | 0x00              | ok
DIMM 5           | 0x00              | ok
DIMM 6           | 0x00              | ok

References

↑ http://www.ish.com.au/node/1337

[1] ttp://www.ish.com.au/node/1337

[1]

@@ Line 1: / Line 1: @@
 == IPMI: Intelligent Platform Management Interface ==
-Fra FreeBSD version 6.2<ref>http://www.ish.com.au/node/1337</ref> er impi indbygget i base systemet.
+Fra FreeBSD version 6.2<ref>http://www.ish.com.au/node/1337</ref> er impi indbygget i base systemet. Bemærk '''IPMI''' er et indbygget overvågningssytem på motherboardet. Oftest fundet på server motherboard.
 === Enable IPMI ===
 On-the-fly
@@ Line 6: / Line 6: @@
 [root@mars run]#<input>kldload ipmi</input>
 </source>
+Hvis IPMI modulet ikke loader, er IPMI sikkert ikke indbygget på dit motherboard.
 Automatic load when booting
 <source lang=cli>
 [root@mars run]#<input>echo 'ipmi_load="YES"' >> /boot/loader.conf</input>
 </source>
 == Using ipmi ==
 For at bruge ipmi skal '''ipmitool''' installeres som package eller via ports. herunder vist installation af package

Navigation menu