Beowulf Aug2010/Installation/PXEboot/Ubuntu

From Teknologisk videncenter
Jump to: navigation, search

<accesscontrol>teacher</accesscontrol> Følg guiden her. Har dog ikke fået det til at virke, stopper bare når den skal finde hardware.

Denne er til information: "I've installed hardy server on a dell poweredge 1750--older hardware.

Perhaps you need to initialize your disks via the RAID controller first. Try going into the BIOS (or RAID BIOS Control-S or something similar) and make sure that you have your drives set up the way you want--RAID configuration, hotswap, whatever. Once that is done, then put in the CD and run the "Check CD for errors" to make sure your CD drive can read the entire disk. Server CDROM drives tend to get dirty because of the massive airflow of server machines."[1]

Har også prøvet den her: https://help.ubuntu.com/community/DisklessUbuntuHowto
Og den her: https://help.ubuntu.com/community/Installation/OnNFSDrive

Men det virker ikke helt efter hensigten endnu.

Reference