Cisco basic configuration

From Teknologisk videncenter
Revision as of 08:59, 8 April 2009 by Heth (talk | contribs)
Jump to: navigation, search
Picture 1: Putty serial communication

In this example we will configure a Cisco 2621XM Router

  • hostname Viborg1
  • fastethernet 0/0 - 192.168.22.1/24
  • fastethernet 0/1 - 172.16.0.1/16
  • loopback 0/0 - 10.10.10.1/32
  • RIP version 2 on both subnets

Connect a cisco Roolover cable from the Routers Consoleport to a COM port on your PC. Start a terminalemulator. I will recommend the terminalemulator putty Start putty and fill out the serial data. Marked with red rings in picture 1.

  • BREAK
  • password cisco class
  • enable
  • erase sta
  • reload
Retrieved from "http://mars.merhot.dk/w/index.php?title=Cisco_basic_configuration&oldid=3412"