Errdisable Cisco IOS

To use Cisco IOS error disable feature you need to make sure what features are possible on the platform.

PB1#show version
<notice>Output omitted.........</notice>
System image file is "flash:/c3550-ipservicesk9-mz.122-44.SE6.bin"
<notice>Output omitted.........</notice>
Model number: WS-C3550-24-EMI
<notice>Output omitted.........</notice>
PB1#<input>show errdisable recovery</input>
ErrDisable Reason            Timer Status
-----------------            --------------
arp-inspection               Disabled
bpduguard                    Disabled
channel-misconfig            Disabled
dhcp-rate-limit              Disabled
dtp-flap                     Disabled
gbic-invalid                 Disabled
l2ptguard                    Disabled
link-flap                    Disabled
mac-limit                    Disabled
link-monitor-failure         Disabled
loopback                     Disabled
oam-remote-failure           Disabled
pagp-flap                    Disabled
port-mode-failure            Disabled
psecure-violation            Disabled
security-violation           Disabled
sfp-config-mismatch          Disabled
storm-control                Disabled
udld                         Disabled
unicast-flood                Disabled
vmps                         Disabled

Timer interval: 300 seconds

Interfaces that will be enabled at the next timeout:

BPDU guard

PB1(config)#<input>errdisable recovery cause bpduguard</input>
PB1(config)#<input>errdisable recovery interval 120</input>
PB1(config)#<input>int ran fa0/1 - 12</input>
PB1(config-if-range)#spanning-tree bpduguard enable
PB1(config)#<input><CTRL-Z></input>
PB1#show errdisable recovery
ErrDisable Reason            Timer Status
-----------------            --------------
arp-inspection               Disabled
bpduguard                    Enabled
channel-misconfig            Disabled
<notice>Output omitted.........</notice>

Timer interval: 120 seconds

Interfaces that will be enabled at the next timeout: