First-hop security IPv6 Cisco IOS

This article is under development....

IPv6 RA Guard

IPv6 Router Advertisement Guard. See rfcdraft-ietf-v6ops-ra-guard-04

IPv6 RA guard provides support for allowing the network administrator to block or reject unwanted or rogue RA guard messages that arrive at the network switch platform. RAs are used by routers to announce themselves on the link.

Unicast Reverse Path Forwarding

To avoid spoofed packets passing a Router. Could be DoS attack. With RPF - reverse Path Forwarding - the router checks that the sending hosts source IP address matches the routing table on the receiving interface.

Example

An access-list can be used as an option to this command

R1(config)#<input>interface fa0/1</input>
R1(config-if)#<input>ipv6 verify unicast reverse-path</input>

Links

• Cisco Ipv6 first-hop security