VLAN øvelse

Opgave 1: Opbyg netværk

Opbyg følgende netværk i Packet Tracer:

Netværk i packet tracer

• PC0 forbundet med lige i gennem kabel til Switch0 port 1
• PC1 forbundet med lige i gennem kabel til Switch0 port 10
• PC2 forbundet med lige i gennem kabel til Switch1 port 1
• PC3 forbundet med lige i gennem kabel til Switch1 port 10
• Switch0 port 24 forbundet med Switch1 port 24 med kryds kabel

IP adresser på PC'erne

• PC0 har IP adressen 192.168.1.10/24
• PC1 har IP adressen 192.168.1.11/24
• PC2 har IP adressen 192.168.1.12/24
• PC3 har IP adressen 192.168.1.13/24

Er det muligt at pinge mellem PC'erne??

Opgave 2: VLAN oprettes

Opret VLAN på begge switche: Husk skal gøres på begge switche..

Switch>
Switch><input>enable</input>
Switch#<input>configure terminal</input>
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#<input>vlan 100</input>
Switch(config-vlan)#<input>name Students</input>
Switch(config-vlan)#<input>exit</input>
Switch(config)#<input>vlan 200</input>
Switch(config-vlan)#<input>name Teachers</input>
Switch(config-vlan)#<input>exit</input>
Switch(config)#<input>exit</input>
Switch#
%SYS-5-CONFIG_I: Configured from console by console

Switch#<input>show vlan brief</input>
VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23, Fa0/24
100  Students                         active    
200  Teachers                         active    
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active    
Switch#

Opgave 3: Trunk oprettes

Oprettelse af trunk på port 24. Husk skal gøres på begge switche..

witch><input>enable</input>
Switch#<input>show interfaces trunk</input>

Switch#<input>configure terminal</input>
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#<input>interface fastethernet 0/24</input>
Switch(config-if)#<input>switchport mode trunk</input>
Switch(config-if)#<input>exit</input>
Switch(config)#<input>exit</input>
%SYS-5-CONFIG_I: Configured from console by console

Switch#<input>show interfaces trunk</input>
Port        Mode         Encapsulation  Status        Native vlan
Fa0/24      on           802.1q         trunking      1

Port        Vlans allowed on trunk
Fa0/24      1-1005

Port        Vlans allowed and active in management domain
Fa0/24      1,100,200

Port        Vlans in spanning tree forwarding state and not pruned
Fa0/24      none
Switch#

Opgave 4: PC porte i VLANs

De enkelte porte til PC'erne skal i forskellige VLAN's. Husk skal gøres på begge switche..

Switch><input>enable</input>
Switch#<input>show vlan brief</input>

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                Fa0/17, Fa0/18, Fa0/19, Fa0/20
                                                Fa0/21, Fa0/22, Fa0/23
<notice>100  Students                         active </notice>   
<notice>200  Teachers                         active </notice>   
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active    
Switch#<input>configure terminal</input>
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#<input>interface fastethernet 0/1</input>
Switch(config-if)#<input>switchport mode access</input>
Switch(config-if)#<input>switchport access vlan 100</input>
Switch(config-if)#<input>exit</input>
Switch(config)#<input>interface fastethernet 0/10</input>
Switch(config-if)#<input>switchport mode access</input>
Switch(config-if)#<input>switchport access vlan 200</input>
Switch(config-if)#<input>exit</input>
Switch(config)#<input>exit</input>
Switch#
%SYS-5-CONFIG_I: Configured from console by console

Switch#<input>show vlan brief</input>

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/2, Fa0/3, Fa0/4, Fa0/5
                                                Fa0/6, Fa0/7, Fa0/8, Fa0/9
                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23
<notice>100  Students                         active    Fa0/1</notice>
<notice>200  Teachers                         active    Fa0/10</notice>
1002 fddi-default                     active    
1003 token-ring-default               active    
1004 fddinet-default                  active    
1005 trnet-default                    active

Hvilke PC'er kan der pinges imellem

• PC0 til PC1?
• PC0 til PC2?
• PC0 til PC3?
• PC1 til PC2?
• PC1 til PC3?
• PC2 til PC3?