Cisco basic configuration

From Teknologisk videncenter
Revision as of 08:24, 8 April 2009 by Heth (talk | contribs) (New page: In this example we will configure a Cisco 2621XM Router *fastethernet 0/0 - 192.168.22.1/24 *fastethernet 0/1 - 172.16.0.1/16 *loopback 0/0 - 10.10.10.1/32 *RIP version 2 on both subnets C...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In this example we will configure a Cisco 2621XM Router

  • fastethernet 0/0 - 192.168.22.1/24
  • fastethernet 0/1 - 172.16.0.1/16
  • loopback 0/0 - 10.10.10.1/32
  • RIP version 2 on both subnets

Connect a cisco Roolover cable from the Routers Consoleport to a COM port on your PC. Start a terminalemulator. I will recommend the terminalemulator putty Start putty and fill out the serial data. Marked with red rings in picture 1.

Picture 1: Putty serial communication
Retrieved from "http://mars.merhot.dk/w/index.php?title=Cisco_basic_configuration&oldid=3409"