IS-IS IPv6 Cisco IOS
From Teknologisk videncenter
For generel IS-IS and IS-IS for Ipv4 see IS-IS
Configuring IPv6 IS-IS
Example
hostname R1
!
router isis
address-family ipv6
redistribute static
exit-address-family
net 49.0001.1921.6801.0001.00
!
interface fastethernet0/0
address 2001:410:ffff:1::1/64
ipv6 router isis
isis circuit-type level-2-only
IPv6 IS-IS through IPv4 only islands
Because IS-IS uses CLNP and not IPv6 a standard IPv6-over-IPv4-Tunnel can't be used. A GRE tunnel through IPv4 is necessary.
router isis
net 49.0001.1921.6801.0001.00
!
interface tunnel0
ip address 222.2.2.2 255.255.255.0
ipv6 address 2001:410:ffff:1::1/64
tunnel source ethernet0
tunnel destination 132.214.1.3
tunnel mode gre ip
ip router isis
ipv6 router isis
isis circuit-type level-2-only
Testing
CLNS throgh tunnel
R7#<input>show clns neighbors</input>
System Id Interface SNPA State Holdtime Type Protocol
Hold8 Fa0/0 001b.548b.3f82 Up 27 <notice>L2</notice> IS-IS
R6 <notice>Tu10</notice> 192.168.220.1 Up 28 <notice>L2</notice> IS-IS
Testing
R7#<input>traceroute clns 49.0000.1921.6821.7002.00</input>
Type escape sequence to abort.
Tracing the route to 49.0000.1921.6821.7002.00
1 49.0000.1921.6821.7002.00 0 msec ! 0 msec ! 0 msec !