GPS RECEIVER - MT3329

Module on MCBSTM32C Keil board

GPS Module attached to Keil board. (Click to enlarge)

Using the STM32F107VC remapped USART1 to PB6 (USART1_TX)and PB7 (USART1_RX).

• The [1] show that PB6 is used for CAN2 bus TX. CAN2 bus can't be used at the same time as the GPS module.
• The [2] show that PB7 is used for the USER button. To use PB7 as RX from the GPS module it is necesarry CAN2 bus can't be used at the same time as the GPS module.

Data sheets

• Binary Protocol
• MTK Commands
• MTK Commands
• Mediatek 3329.pdf
• USARTS on MCBSTM32C

ARM board projects

• GPS_TWO_UARTS.zip

Links

• Farnell webpage]