3-tier design/SVIIPs
From Teknologisk videncenter
Before configuring Switched Vitual Interfaces the vlans need to be created on the switch <sDLS1(config)#<input>vlan 10</input> DLS1(config-vlan)#<input>name Data1</input> DLS1(config-vlan)#<input>end</input> DLS1# %SYS-5-CONFIG_I: Configured from console by console
DLS1#<input>show vlan brie</input>
VLAN Name Status Ports
-------------------------------- --------- -------------------------------
1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig0/1
Gig0/2
<notice>10 Data1 active</notice> 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active DLS1#ource lang=cli>
</source>