3-tier design/SVIIPs
From Teknologisk videncenter
Before configuring Switched Vitual Interfaces the vlans need to be created on the switch
DLS1(config)#<input>vlan 10</input>
DLS1(config-vlan)#<input>name Data1</input>
DLS1(config-vlan)#<input>end</input>
DLS1#
%SYS-5-CONFIG_I: Configured from console by console
DLS1#<input>show vlan brie</input>
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig0/1
Gig0/2
<notice>10 Data1 active</notice>
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
DLS1#