3-tier design/SVIIPs
From Teknologisk videncenter
Before configuring Switched Vitual Interfaces the vlans need to be created on the switch
DLS1(config)#<input>vlan 10</input>
DLS1(config-vlan)#<input>name Data1</input>
DLS1(config-vlan)#<input>end</input>
DLS1#
%SYS-5-CONFIG_I: Configured from console by console
DLS1#<input>show vlan brief</input>
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig0/1
Gig0/2
<notice>10 Data1 active</notice>
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
DLS1#To make room for the HSRP ip the first Distribution Switch should have the second avoilable IP address in the scope, and the second Switch should have the third ip address.
DLS1(config)#<input>interface vlan 10</input>
DLS1(config-if)#
%LINK-5-CHANGED: Interface Vlan10, changed state to up
DLS1(config-if)#<input>ip address 10.1.10.2 255.255.255.0</input>
DLS1(config-if)#<input>end</input>
DLS1#
%SYS-5-CONFIG_I: Configured from console by console
<input>show ip interface brief</input>
Interface IP-Address OK? Method Status Protocol
<notice>FastEthernet0/1 10.0.0.1 YES manual up up</notice>
FastEthernet0/2 unassigned YES unset down down
FastEthernet0/3 unassigned YES unset down down
FastEthernet0/4 unassigned YES unset down down
FastEthernet0/5 unassigned YES unset down down
FastEthernet0/6 unassigned YES unset down down
FastEthernet0/7 unassigned YES unset down down
FastEthernet0/8 unassigned YES unset down down
FastEthernet0/9 unassigned YES unset down down
FastEthernet0/10 unassigned YES unset down down
DLS1#