FPGA

• Teori
• Ole vildledninger???
  • QuartusII Quickguide (Loads PDF file)
  • QuartusII Schematic projekt start (Loads PDF file)
  • Quartus VHDL projekt start (Loads PDF file)
  • Schamtic & VHDL (Loads PDF file)
  • VHDL (Loads PDF file)
• Lkaa vejledning
  • VHDL (Loads PDF file)
  • QuartusII (Loads PDF file)
• Hints
  • Installation af driver til DE1 board: Vælg denne sti: C:\altera\91\quartus\drivers\usb-blaster
  • Eller hente driver fra Altera's hjemmeside samt instruktion: http://www.altera.com/support/software/drivers/dri-index.html
  • Clk_divider fra 27MHz til 100Hz (Loads ZIP file)
  • Tidsmåler!! uden logik og med 100Hz clk (Loads ZIP file)
  • Digital logik (Loads ZIP file)

I have one method of using a counter. The formula for calculating the counter is ( Actual Frequency / required frequency)

use that as the set point for your counter and make use of this code(This IS for 26MHz from 100MHz clock, so the Count value WilL be(100m/26M = 3.)

• if (clock = '1' and clock'event ) then
•      if ( count /= 4)
•       count := count + 1 ;
•       clock_out := clock_out ;
•        else
•         count := 0 ;
•           clock_out := not clock_out ;
•     end if;
• end if ;

so for 13MHz the count value will be 7

• Opgaver
  • FPGA øvelser (Loads PDF file)
• Links
  • www.altera.com
  • VHDL tutorial
  • VHDL 93 Reference Guide
  • QuartusII webdesign free