Difference between revisions of "MPLS"

From Teknologisk videncenter
Jump to: navigation, search
m (Eksempel på MPLS LER router. (Label Edge Router))
m (Learning materials)
Line 126: Line 126:
 
  default-information originate
 
  default-information originate
 
!
 
!
 +
</source>
 +
 +
= Notater =
 +
Når to routere laver en LDP session mellem naboer bruges højeste Loopback adresse. Derfor skal naboen kende denne adresse. Brug
 +
<source lang="cli>
 +
R3(config)#<input>mpls ldp router-id loopback 0</input>
 
</source>
 
</source>
  

Revision as of 14:32, 11 June 2009

Multiprotocol Protocol Label Switching

Eksempel på MPLS LER router. (Label Edge Router)

<input>ip cef</input>
!
<input>ip vrf PB
 description Kunde: Pengebanken (PB) i Birksund (BKS) : PB-BKS
 rd 1100:1
 route-target export 1100:1
 route-target import 1100:1</input>
!
<input>ip vrf SF
 description Kunde: Steel Furniture i Birksund
 rd 1000:1
 route-target export 1000:1
 route-target import 1000:1</input>
!
interface Loopback0
 ip address 10.10.10.1 255.255.255.255
 ip router isis 
!
interface FastEthernet0/0
 description Forbindelse til 3550RDB1
 bandwidth 10000
 ip address 192.168.11.1 255.255.255.0
 ip router isis 
 speed 10
 full-duplex
 <input>mpls label protocol ldp
 tag-switching ip</input>
!
interface FastEthernet0/0.100
 description VLAN for Steel Furniture (SF) i Rodborg (RDB)
 bandwidth 2000
 encapsulation dot1Q 100
 <input>ip vrf forwarding SF</input>
 ip address 172.24.0.1 255.255.0.0
 no ip redirects
 no ip proxy-arp
 no snmp trap link-status
!
interface FastEthernet0/0.200
 description VLAN for Pengebanken (PB) i Rodborg (RDB) : PB-RDB
 bandwidth 2000
 encapsulation dot1Q 200
 <input>ip vrf forwarding PB</input>
 ip address 172.28.0.1 255.255.0.0
 no ip redirects
 no ip proxy-arp
 no snmp trap link-status
!
interface Serial0/0
 mtu 1508
 bandwidth 4000
 ip address 192.168.90.1 255.255.255.252
 ip router isis 
 <input>mpls label protocol ldp
 tag-switching ip</input>
!
router isis 
 net 49.0000.0101.3300.1111.00
 is-type level-2-only
 metric-style wide
!
router bgp 65000
 bgp log-neighbor-changes
 neighbor 10.10.10.3 remote-as 65000
 neighbor 10.10.10.3 update-source Loopback0
 !
 address-family ipv4
 neighbor 10.10.10.3 activate
 no auto-summary
 no synchronization
 exit-address-family
 !
 <input>address-family vpnv4
 neighbor 10.10.10.3 activate
 neighbor 10.10.10.3 send-community extended
 exit-address-family</input>
 !
 <input>address-family ipv4 vrf SF
 redistribute connected
 no auto-summary
 no synchronization
 exit-address-family</input>
 !
 <input>address-family ipv4 vrf PB
 redistribute connected
 no auto-summary
 no synchronization
 exit-address-family</input>

Eksempel på LSR Router (Label Switch Router)

<input>ip cef</input>
!
interface Loopback0
 ip address 10.10.10.2 255.255.255.255
 ip router isis 
!
interface Serial0/0
 mtu 1508
 bandwidth 8000
 ip address 192.168.90.5 255.255.255.252
 ip nat inside
 ip router isis 
 <input>mpls label protocol ldp
 tag-switching ip</input>
 clock rate 8000000
!
interface Serial0/1
 mtu 1508
 bandwidth 8000
 ip address 192.168.90.2 255.255.255.252
 ip nat inside
 ip router isis 
 <input>mpls label protocol ldp
 tag-switching ip</input>
 clock rate 8000000
!
router isis 
 net 49.0000.0101.3300.2222.00
 is-type level-2-only
 metric-style wide
 default-information originate
!

Notater

Når to routere laver en LDP session mellem naboer bruges højeste Loopback adresse. Derfor skal naboen kende denne adresse. Brug

R3(config)#<input>mpls ldp router-id loopback 0</input>

Learning materials

PDF-logo.pngIntroduktion til MPLS

PDF-logo.pngMPLS VPN QoS design

PDF-logo.pngCisco IOS MPLS konfiguration del 1

PDF-logo.pngCisco IOS MPLS konfiguration del 2

Links