TDC Juniper CPE

Skema

Mandag	Tirsdag	Onsdag	Torsdag	Fredag
Slide - Juniper Intro Opgave - Juniper Sproget Slide - Generel Setup Opgave - Basic Setup Slide - Generel Udvidet Setup Opgave - Udvidet setup Slide - VLANs Opgave - VLAN	Slide - SRX Slide Opgave - Host inbound traffic Opgave - Security Policy Opgave - Security Policy 2 Ekstra Opgave - Traffic Monitoring	Slide - Static Routing Opgave - Statisk Routing Slide - Dynamisk Routing Opgave - Dynamisk Routing Ekstra opgave - Trunk til cisco Ekstra opgave - Aggregated Ethernet	Class of Service Dag Opgave - Virtual Routers	Fejlfinding og opfølgning. Opgave - NAT opgave

Juniper

• Juniper Basics
• Generel setup
• Generel udvidet setup
• Statisk Routing
• Dynamisk Routing
• Virtual Routers
• Class of Service
• Sikkerhed
• RPM

Juniper FAQ

Se Juniper FAQ

Bilag

• SRX Troubleshooting Library
• SRX Getting Started (JumpStation)
• RFC 1812
• Real-Time Performance Monitoring On Juniper Networks Device
• SRX Getting Started - Junos Software Installation/Upgrade
• Flow-Based and Packet-Based Processing
• Security Zones and Interfaces Overview
• Getting Started - Configure Traffic Logging (Security Policy Logs)
• Perform Packet Capture on SRX Branch Devices
• Attack Detection and Prevention
• SRX Getting Started - Configuration Rollback
• SRX Getting Started - Commit Configuration
• SRX Getting Started - Show Configuration
• SRX Getting Started - Configure OSPF
• Configuring VLAN Tagging

Links

• GetIF version 2.3.1
• Class of Service Configuration Guide