Wireless LAN Controller 4400

From Teknologisk videncenter
Revision as of 12:22, 11 April 2015 by Rael (talk | contribs) (4404)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

4404

IP konfiguration

Der skal sættes min 4 IP adresser på WLC'en[1]

Service IP
The service-port interface controls communications through the service port. Its IP address must be on a different subnet from the management and AP-manager interfaces. This configuration enables you to manage the controller directly or through a dedicated management network to ensure service access during network downtime.
Management IP
The management interface is the default interface for in-band management of the controller and connectivity to enterprise services such as AAA servers.
AP Manager
The AP-manager interface is used for Layer 3 communications between the controller and lightweight access points. It must have a unique IP address and is usually configured on the same VLAN or IP subnet as the management interface, but this is not a requirement.
Virtual interface IP
The virtual interface is used to support mobility management, DHCP relay, and embedded Layer 3 security such as guest web authentication and VPN termination. All controllers within a mobility group must be configured with the same virtual interface IP address.
  1. http://www.cisco.com/c/en/us/td/docs/wireless/controller/4400/quick/guide/ctrlv32.html