Difference between revisions of "IPMI/FreeBSD"
From Teknologisk videncenter
< IPMI
m (FreeBSD ipmi moved to IPMI/FreeBSD) |
m (→References) |
||
| Line 100: | Line 100: | ||
</source> | </source> | ||
{{Source cli}} | {{Source cli}} | ||
| + | == System Event Log (SEL)== | ||
| + | <source lang=cli> | ||
| + | ipmitool <input>sel time get</input> | ||
| + | 01/07/2011 15:26:00 | ||
| + | [root@mars2 ~]# <input>ipmitool sel clear</input> | ||
| + | Clearing SEL. Please allow a few seconds to erase. | ||
| + | [root@mars2 ~]# <input>ipmitool sel list</input> | ||
| + | 1 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Non-critical going high | ||
| + | 2 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Critical going high | ||
| + | 3 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Non-recoverable going high | ||
| + | [root@mars2 ~]# <input>ipmitool sel get 1</input> | ||
| + | SEL Record ID : 0001 | ||
| + | Record Type : 02 | ||
| + | Timestamp : 01/07/2011 15:20:14 | ||
| + | Generator ID : 0020 | ||
| + | EvM Revision : 04 | ||
| + | Sensor Type : Unknown | ||
| + | Sensor Number : b6 | ||
| + | Event Type : Threshold | ||
| + | <notice>....</notice> | ||
| + | </source> | ||
== References == | == References == | ||
<references/> | <references/> | ||
[[Category:FreeBSD]] | [[Category:FreeBSD]] | ||
Revision as of 16:28, 7 January 2011
Contents
IPMI: Intelligent Platform Management Interface
Fra FreeBSD version 6.2[1] er impi indbygget i base systemet. Bemærk IPMI er et indbygget overvågningssytem på motherboardet. Oftest fundet på server motherboard.
Enable IPMI
On-the-fly
[root@mars run]#<input>kldload ipmi</input>Hvis IPMI modulet ikke loader, er IPMI sikkert ikke indbygget på dit motherboard. Automatic load when booting
[root@mars run]#<input>echo 'ipmi_load="YES"' >> /boot/loader.conf</input>Using ipmi
For at bruge ipmi skal ipmitool installeres som package eller via ports. herunder vist installation af package
[root@mars run]#<input>pkg_add -r ipmitool</input>Eksempel
[root@mars run]#<input>ipmitool chassis status</input>
System Power : on
Power Overload : false
Power Interlock : inactive
Main Power Fault : false
Power Control Fault : false
Power Restore Policy : previous
Last Power Event : ac-failed
Chassis Intrusion : active
Front-Panel Lockout : inactive
Drive Fault : false
Cooling/Fan Fault : falseHardware (FRU: Field Replaceable Units)
[root@mars run]#ipmitool fru
FRU Device Description : Builtin FRU Device (ID 0)
Chassis Type : Tower
Board Mfg Date : Tue Jan 13 08:35:00 2004
Board Mfg : Intel
Board Product : SE7501HG2
Board Serial : KRH140200266
Board Part Number : A95718-306
Product Manufacturer : IntelSensors.
[root@mars run]#<input>ipmitool sdr</input>
Baseboard 1.2V | 1.20 Volts | ok
Baseboard 1.25V | 1.25 Volts | ok
Baseboard 1.8V | 1.78 Volts | ok
Baseboard 1.8VSB | 1.80 Volts | ok
Baseboard 2.5V | 2.49 Volts | ok
Baseboard 3.3V | 3.25 Volts | ok
Baseboard 3.3AUX | 3.21 Volts | ok
Baseboard 5.0V | 4.99 Volts | ok
Baseboard 5VSB | 4.97 Volts | ok
Baseboard 12V | 11.90 Volts | ok
Baseboard 12VRM | 11.95 Volts | ok
Baseboard -12V | -11.98 Volts | ok
Baseboard VBAT | 3.20 Volts | ok
Baseboard Temp | 38 degrees C | ok
Basebrd FanBoost | 38 degrees C | ok
SCSI A Term Pwr | 4.76 Volts | ok
SCSI B Term Pwr | 4.73 Volts | ok
Processor 1 Temp | 31 degrees C | ok
Processor 2 Temp | 33 degrees C | ok
Proc1 FanBoost | 31 degrees C | ok
Proc2 FanBoost | 33 degrees C | ok
Processor 1 Fan | no reading | ns
Processor 2 Fan | no reading | ns
Processor Vccp | 1.47 Volts | ok
Pwr Unit Status | 0x00 | ok
BMC Watchdog | 0x00 | ok
Scrty Violation | 0x00 | ok
Physical Scrty | 0x01 | ok
POST Error | 0x00 | ok
Critical Int | 0x00 | ok
Memory | 0x00 | ok
Logging Disabled | 0x00 | ok
Proc Missing | 0x00 | ok
ACPI State | 0x01 | ok
System Event | 0x00 | ok
Button | 0x00 | ok
SMI Timeout | 0x00 | ok
Sensor Failure | 0x00 | ok
NMI State | 0x00 | ok
SMI State | 0x00 | ok
FSB Mismatch | 0x00 | ok
Processor 1 Stat | 0x80 | ok
Processor 2 Stat | 0x80 | ok
CPU Therm Ctrl | 0x01 | ok
Fan Redundancy | Not Readable | ns
DIMM 1 | 0x04 | ok
DIMM 2 | 0x04 | ok
DIMM 3 | 0x00 | ok
DIMM 4 | 0x00 | ok
DIMM 5 | 0x00 | ok
DIMM 6 | 0x00 | okSystem Event Log (SEL)
ipmitool <input>sel time get</input>
01/07/2011 15:26:00
[root@mars2 ~]# <input>ipmitool sel clear</input>
Clearing SEL. Please allow a few seconds to erase.
[root@mars2 ~]# <input>ipmitool sel list</input>
1 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Non-critical going high
2 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Critical going high
3 | 01/07/2011 | 15:20:14 | Unknown #0xb6 | Upper Non-recoverable going high
[root@mars2 ~]# <input>ipmitool sel get 1</input>
SEL Record ID : 0001
Record Type : 02
Timestamp : 01/07/2011 15:20:14
Generator ID : 0020
EvM Revision : 04
Sensor Type : Unknown
Sensor Number : b6
Event Type : Threshold
<notice>....</notice>